Type of boat -- Colvic Sun Cruiser 10 metre diesel twin screw semi displacement hull form
Location -- Burnham Yacht Harbour Marina, Burnham on Crouch, Essex
Product Application September 2019 – The old coating on the propellers was removed by scraping and then finished with 80 grade wet n dry (no different to previous years) and cleaned thoroughly utilizing Prop Defender kit. The instructions were clear and the chemical cleaner worked well. This ‘polishing’ was very thoroughly done as detailed in instructions The surface preparation presented no problems and the coatings were easy to apply leaving a smooth and very shiny finish.
Effectiveness – The boat was lifted out after approximately 11 months. This was after a prolonged period of no use whilst moored in the Marina. There was some fouling but this cleaned off easily with a pressure washer. In previous years using a variety of different products this had been much more difficult requiring hard scraping.
Comments -- Product performs as advertised but it is worth running the engines in the berth occasionally to minimize build up if boat is not used for a while

David Lenz

+44 (0)1740 625262

Call our friendly team today, we are more than happy to help.

Our address

Based in internationally recognised Science Park which drives innovation, enterprise and economic prosperity

Ocean Coatings Ltd,
NETPark Plexus
Thomas Wright Way
Co. Durham
TS21 3FD

Contact info

For all enquiries and questions please send us an email.

e-mail: info@oceancoatings.co.uk